读文网>电脑>网络知识>路由器>路由器设置>华为路由器

华为路由器配置命令介绍【汇总四篇】

下文是读文网小编为大家提供的华为路由器配置命令大全,欢迎大家阅读

基本命令en 进入特权模式conf 进入全局配置模式in s0 进入 serial 0 端口配置ip add xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx 添加ip 地址和掩码,电信分配enca hdlc/ppp 捆绑链路协议 hdlc 或者 pppip unn e0 exit 回到全局配置模式in e0 进入

普通用户模式

enable 转入特权用户模式

exit 退出配置

help 系统帮助简述

language 语言模式切换

ping 检查网络主机连接及主机是否可达

show 显示系统运行信息

telnet 远程登录功能

tracert 跟踪到目的地经过了哪些路由器

基本命令

en 进入特权模式

conf 进入全局配置模式

in s0 进入 serial 0 端口配置

ip add xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx 添加ip 地址和掩码,电信分配

enca hdlc/ppp 捆绑链路协议 hdlc 或者 ppp

ip unn e0

exit 回到全局配置模式

in e0 进入以太接口配置

ip add xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx 添加ip 地址和掩码,电信分配

exit 回到全局配置模式

ip route 0.0.0.0 0.0.0.0 s 0 添加路由表

ena password 口令

write

exit

以上根据中国电信 ddn 专线多数情况应用

全局配置模式

aaa-enable 使能配置AAA(认证,授权和计费)

access-list 配置标准访问表

arp 设置静态ARP人口

特权用户模式

#

clear 清除各项统计信息

clock 管理系统时钟

configure 进入全局配置模式

debug 开启调试开关

disable 返回普通用户模式

download 下载新版本软件和配置文件

erase 擦除FLASH中的配置

exec-timeout 打开EXEC超时退出开关

exit 退出配置

first-config 设置或清除初次配置标志

help 系统帮助简述

language 语言模式切换

monitor 打开用户屏幕调试信息输出开关

no 关闭调试开关

ping 检查网络主机连接及主机是否可达

reboot 路由器重启

setup 配置路由器参数

show 显示系统运行信息

telnet 远程登录功能

tracert 跟踪到目的地经过了哪些路由器

unmonitor 关闭用户屏幕调试信息输出开关

write 将当前配置参数保存至FLASH MEM中

相关热搜

相关文章

【华为路由器】热点

【华为路由器】最新