为您找到与产品设计工程师英文相关的共200个结果:
ELECTRONICS ENGINEER(Experienced)
Sandy Lin 15/F,TOWER2 ,BRIGHT CHINA,BUILDING1,BEIJING.
BACKGROUND SUMMARY
Over eleven years of extensive computer/electronics experience.Versed in both digital and analog electronics withspecific emphasis on computer hardware/software.Special expertise in system and component evaluation.Network supervisor responsible for installing/maintaining Arcnet LAN system.Proficient in assembly and C programming languages.Excelent communication skills including written,verbal and interpersonal.
PROFESSIONAL WORK EXPERIENCE
Stevenson Data Systems,Los Angeles,CA 1981-1993
Components Evaluation Engineer 1992-1993
Responsible for the characterization and evaluation of, and approved vendors list for:Power supplies,oscillators,crystals,and programmable logic used in desktop and laptop computers.Evaluated and recommended quality components that increased product profitability.Created adn developed power supply test plan used for evqluating third party power supplies.Interacted with vendors to resolve problems associated with components qualification.Technical advisor for Purchasing.Promoted to engineer II.
Design Evaluation Engineer 1990-1992
Evaluated new computer product designs ,solving environmental problems on prototype computers.Conducted systems analysis on new computer profucts to ensure hardware,software and mechanical design integrity.Designed hardware and software for PC,ISA bus programmable load board used for environmental testing.Performed reliability lift testing on computer systems.Installed/maintained 20 user.Novell,Arcnet LAN system.Examined system and sub-system susceptibility to electrostatic discharge in order to meet IEC-801-2 industry standards.Analyzed complete power and load of computer system and subsystem to verify power and load estimations.
Assistant Engineer 1981-1990
Performed extensive hardware evaluation ion prototype computers,tested prototype units for timing violation using the latest state-of-the-art test equipment,digital oscilloscopes and logic analyzers.Performed emvironmental,ESD and acoustic testing.Designed and built a power-up test used to test prototype computers during cold boot.
EDUCATION
Bachelor of Science in Electrical Engineering
--University of Southern California 1990
Associate in Engineering Electronics
--University of Southern California 1981
Job descriptions emphasize candidate's accomploshments.
Work history is stated in reverse chronological order,with most recent employment listed first.
浏览量:2
下载量:0
时间:
浏览量:2
下载量:0
时间:
Name: | Nationality: | China (Mainland) | |
Current Place: | Guangzhou | Height/Weight: | 170 cm70 kg |
Marital Status: | Single | Age: | 27 years |
Career Objective |
Application type: | Jobseeker | ||
Preferred job title: | Mechanical engineer: Mechanical engineering 、 Project manager/administrator: Mechanical engineering 、 Quality management/test manager(QA/QC Manager: Mechanical engineering | ||
Working life: | 5 | Title: | Middle title |
Job type: | Full time | Expected Start date: | In two weeks |
Expected salary: | ¥5,000--¥8,000 | Preferred working place: | Guangdong province Guangdong province Guangdong province |
Work experience |
浏览量:2
下载量:0
时间:
以下是读文网小编收集整理的《IQC工程师英文简历》全部内容,希望对大家有所帮助,如果您喜欢小编的推荐,请继续关注读文网。
Name: Mr. W Gender: Male
Wedlock: Married Nation: Han
Residence: Guangdong-Huizhou Age: 35
Location: Guangdong-Huizhou Height: 174cm
Target Locations: Guangdong-Guangzhou、 Guangdong-Huizhou
Target Positions: Quality/Safety Management-QA/QC Manager/Supervisor
Quality/Safety Management-Safety/Health/Environmental Manager/Supervisor
Target Jobs: Quality manager、 SrQuality supervisor
Education
1995-09 ~ 2000-07 Zhengzhou University Design of machine Bachelor Degree
Training
2011-06 ~ 2011-11 Honeywell six sigma center Honeywell six sigma GB core course
2009-07 ~ 2009-07 Yujie Management Consulting Guangzhou ISO 14001/OHSAS 18001 internal auditor YUJ09-EMS-5511
2009-04 ~ 2009-04 First Priority Think on your feet -
2008-09 ~ 2008-09 Bureau Veritas Guangzhou ISO 9001 internal auditor GZ/QMC***
2005-05 ~ 2005-06 Sony Group China Sony Six Sigma Black belt training
【you are not full member,please contact us.】 (2010-08 ~ Present)
Company Type: Joint Venture Company Category: Electrical,Micro-electronics
Job Title: QA/QC Supervisor Positions: QA/QC Manager/Supervisor
Job Description: -IQC/OQC/IPQC management,
-Supporting Sourcing group to choose good suppliers
-Monthly Report for suppliers’ quality status
-Management of OEM/Cooperative factories
-Supporting on QMS building
-Quality Team management
-Make quality control flow improved
-Support NPI in quality function
-Started to manage the Speaker workshop department from the middle of May, 2012
-Push six sigma fundamentals training for whole company, completed in end of 2010
-Improved main construction & processes of quality department
-Support QMS built ISO 9001 quality management system
-Lead Honeywell six sigma GB training & projects in May(planned to complete in end of 2011)
-Six Sigma GB project: (Reduce metal materials DPPM) metal parts’ IQC reject ppm reduced- from 440,000 to 170,000
-Use six sigma tools, reduce the wastes & re-layout the lines in speaker workshop, made the productivity increased from 83% to 87.5% at the end of 2012
-Enhance quality level in speaker department, no customer complaints happened in the second half of 2012
【you are not full member,please contact us.】 (2009-07 ~ Present)
Company Type: Joint Venture Company Category: Other Production,Manufacturing,Processing
Job Title: Positions: QA/QC Manager/Supervisor
Job Description: *Team Leader of ISO 9001 project, building the ISO 9001 system of this company
*As the EHS Supervisor, take charge the EHS(Environment/Healthy/Safety) management job of whole company
*Tea Leader of ISO 14001/OHSAS 18001, building the two system of this company
*In charge of the Quality Department in High Voltage Disconnector. Also manage the calibration job.
*Support the sourcing department to audit our suppliers
*Built the ISO 9001 system of GHD, make all the staff attend the ISO project.Passed the ISO 9001 certification audit in Jan, 2009
*Take charge the EHS job- no FR accident happened till now.
*Built the OHSAS 18001/ISO 14001 system of GHD, make the system run good.Passed the OHSAS 18001/ISO 14001 system certification audit in Sep, 2009 and got the certificates of***in Oct 2009
【you are not full member,please contact us.】 (2003-12 ~ 2008-07)
Company Type: Foreign Enterprise Company Category: Electrical,Micro-electronics
Job Title: Positions: QA/QC Manager/Supervisor
Job Description: * To reach the quality targets by six sigma skills
* To keep the quality system right and improving.
* To solve all the line quality problems, reach the line quality targets and improve the managing skills with QM skills.
* Underlings' managing
* Supporting on customer's requirements
- FY04 1H/2H, PIC of Quality management on CD-R model/portable model/PSP model.Quality targets reached (No serious quality problems, no serious customer complaints).
- FY05 1H/2H, PIC of QA/safety/calibration management. No calibration problems happened and safety audits passed successfully (UL audits*3 /CCC audit*1)
- FY06 2H PIC of quality management on sony PS3 model. Customer ASUS requirements reached.(Target: 500ppm on return goods, actually 286ppm)
【you are not full member,please contact us.】 (2001-08 ~ 2003-12)
Company Type: Foreign Enterprise Company Category: Electrical,Micro-electronics
Job Title: Positions: Technical Support Engineer
Job Description: * On-site in Customer‘s production lines & support on customer’s quality targets
* Analysis of customer's defective samples
* Customer complaint solving & CS system improvement
- In FY03 1H, Main protable customers' quality targets reached.(Philips,1000ppm /Ngailik, 5000ppm)
Reason for Leaving: Promotion
【you are not full member,please contact us.】 (2000-07 ~ 2001-06)
Company Type: State Owned Enterprise Company Category: Other Production,Manufacturing,Processing
Job Title: Positions: Machine Design and Manufacture Engineer
Job Description: Electric connectors designing
Special Skills
Professional Title: No
Computer Level: junior
Computer Skills: Be familiar with any office software.
Be familiar with two mail system: Microsoft Outlook & IBM lotus notes
Have good PC hardware knowledge
Strengths: * More than ten years experiences in product quality control. Be familiar with many quality management skills
* Be familiar with familiar Quality system/Environment system/Safety system. Good at system building,spreading,certificate & maintaining.
* Good manpower & team management experience.
* A good team player.
* Very skilled with six sigma tools
Language Skills
Chinese: Good Cantonese: Very Bad
English Level: CET-t
English: Good
Career Objective
Career Direction: I have good experience in quality control/EHS control/QMS/EHS, I want to work as those kinds of positions.
Requirements:
Self Info.
Self Assessment: I am a seasoned quality Manager. I have totally 11 years working experience. Nearly 7 years working experience in quality department of Sony and 2 years in EHS & QMS department of Areva T&D.
Now working in Honeywell Tenggao (Guangzhou) A/V.
I have more than 10 years experience in quality control (8 years in management). Familiar in normal control tools, I am also own a Sony Six Sigma Black Belt certificate & a Honeywell Six Sigma GB core certificate.
I am able to work under great pressure & manage a quality team well
Hobbies:
Certifications
Honeywell Six Sigma GB core certificate 2011-12-06
ISO 14001/OHSAS 18001 Internal Audito 2009-07-01
ISO Internal Auditor/Registed Auditor 2008-09-18
Sony Six Sigma Black Belt certificate 2005-05-20
浏览量:2
下载量:0
时间:
以下是读文网小编收集整理的《IE工程师英文简历》全部内容,希望对大家有所帮助,如果您喜欢小编的推荐,请继续关注读文网。
Name: Mr. R Gender: Male
Wedlock: Single Nation: Han
Residence: Guangdong-Qingyuan Age: 28
Location: Guangdong-Dongguan Height: 173cm
Target Locations: Guangdong
Target Positions: Industry/Factories-Industrial Engineer
Industry/Factories-Production Management Clerk
Industry/Factories-Technic Engineer
Target Jobs: Industrial Engineer、 Lean Engineer
Education
2005-09 ~ 2009-07 GuangDong University of Technology Industral Engineering Bachelor Degree
Training
2008-12 ~ 2008-12 Guopei Certificate Internal Quality Auditor Training &Qualification
【company name】 (2011-07 ~ Present)
Company Type: Private Enterprise Company Category: Electrical,Micro-electronics
Job Title: Industrial Engineer Positions: Industrial Engineer
Job Description: 1.NPI: process planning, fixture and equipment planning, prepare process checklist
2.Standard time and capacity evaluation, line balance and prepare SOP for new products
3.Maintain the usage of the consumptive material, standard time and capacity
4.Perform line balance and improve process to rise capacity
5.Design and improve the tools and fixture in the work site
6.Monitor the efficiency of the production line, analyze these reasons manpower, machine, material , environment, method, push the relative dept to solve issues
7.Kaizen project planning and push: Auto-machine introduce, production way optimize, manpower and material saving, etc
Career Highlight:
1.Auto-welding machine introduce: welding process operator saving(16 operators-12 operators=4 operators), line balance rate upgrade from 83% to 91%, solder wire saving 3.2grams, cost of solder wire saving 1.6 yuan RMB for each PCBA.
2.Auto-packaging production line planning and implement: master carton packaging operator saving, every production line deploy 2 packaging operators for 8 lines, after introduce the new equipment it takes only 5 operator to seal the master carton
3.Rear cabinet pre-process and final assembly combine: manpower saving include 1 conveyer, 1 visual inspector, 1 loading operator and 1unloading operator(total 4 operators), and saving the usage of bubble bag and partition board
4.Decorative plate incoming package improvement: change the package material and simplify package way to reduce pack cost(from 0.13yuan to 0.09yuan RMB) and cut down unpack operation time( saving 12 seconds)
5.Cooperate with RD to change PCBA process from dispensing process to solder paste process, in order to cut down welding failure rate after wave-soldering. In this case charge of PCBA fixture design and improvement evaluation(repairing welding time 140sec reduce to 70sec,4 repair welding operators cut down to 2 operators)
6.According to the small order quantity of the product, study the less humanizing process for small products to reduce the change over loss time(38 operators*30minute-
20 operator*40minutes=340minutes) and improve 8% of the motion effective rate
Reason for Leaving: Not very good economic benifit of the company,little chance to promote both in position and welfare
【company name】 (2009-07 ~ 2011-06)
Company Type: Joint Venture Company Category: Electrical,Micro-electronics
Job Title: Junior Engineer Positions: Industrial Engineer
Job Description: 1.Establish and maintain the standard labor time, perform line balance to improve production capacity
2.Load capacity assessment: Base on the MPS and the capacity of production line to forecast the workforce requirement
3.Prepare the cost study report for new products, labor rate evaluate basis on factory operating cost, provide quotation to customer for special process
4.Prepare the workshop layout and line layout design basis on logistics analysis
5.Research and develop new packaging method, develop new suppliers for packing material, make order for new packing material and follow up the schedule
6.Deal with customer complaint and settle products packaging issue, improve packaging method to satisfy customer
Career Highlight:
1. Function test man-machine operation improvement: cooperate with TE to disassemble
and rearrange test item, and modify the way of program display in the monitor, in order
to realize one person simultaneously operate two test machine
2. Line balance improvement: provide the cycle time of each model to set up assemble line speed, and upgrade the line balance rate to 80% above for all model
Reason for Leaving: Not a very good department to pratice and learn IE skill,seek more chance to enhance myself
Special Skills
Professional Title:
Computer Level: national computer exam. grade 3
Computer Skills: 1.Be familiar with Windows,be good at Microsoft office software;
2.Have passed National Computer Rank Exam of database technology ;
3.Mastery in Auto CAD of computer aided design software;
Strengths: 1.Be familiar with method study and standard time measurement, know well about Work study technology including 5W1H inquire skill and ECRS four principles
2.Mastery in IE seven techniques, comprehend production management essentials
And the activity about 5S.
3.Be familiar with logistics analysis during the production process, be capable of
Facility planning and machine layout
4.Know about the basis quality management tools, such as Seven QC Methods and FMEA technique
Language Skills
Chinese: Good Cantonese: Good
English Level: CET-4
English: Good
Career Objective
Career Direction: A position as IE engineer or Lean engineer which will use the IE concept and lean production to reduce the cost of enterprise running ,promote the competitive strength,as a result to achieve the win-win target with enterprise.
Requirements:
Self Info.
Self Assessment: 1.Bachelor degree in Industrial Engineering, have good sense in cost down, and have successful case of improvement
2.Worked in Taiwan electronic company for almost two year, be familiar with SMT, DIP, repair welding, final assembly, test and packing process
3.Strong hands-on skills, have experience in guiding operation for new production first MP
4.Good skill in Auto-CAD, can design and make fixture in the workshop
5.Good communication and organization skill in working with other department, have some experience in training
6.Responsibility for work and a man of great loyalty, able to learn, patient and positive.
浏览量:3
下载量:0
时间:
英文简历是使用英文写的简历。英文简历(resume)并无固定不变的单一形式,应聘者完全可以根据个人的具体情况来确定采用何种形式,灵活设计。
Dennis
Objective: Intelligent Transportation Engineer
Dennis@jianli-sky.com
(+86) 123-456-789
We-chat: jianli-sky
EDUCATION
Jobs University 2011.09 - 2014.06
Master of Transportation Engineering
•GPA: 3.8/4.0, National Scholarship (Grade 1) once
•Tutor: Mr. Qiao (Research Domain: ITS)
Jobs University 2007.09 - 2011.07
Bachelor of Transportation Engineering
•GPA: 3.7/4.0, National Scholarship (Grade 2) twice
•First prize of the National Competition of Transport Science and Technology for Students (NACTranS)
•CET-6: 557/710
PROFESSIONAL SKILLS
•Traffic Simulation Software: VISSIM, Paramics, TransModeler, Matlab
•Drawing Software: AutoCAD, Photoshop
INTELLIGENT TRANSPORTATION RELATED EXPERIENCE
Hangzhou XXX digital technology co., LTD 2013.09 - 2014.06
Intelligent Transportation Engineer Intern
•Responsible for the needs of the traffic guidance system analysis and design work
•Responsible for the traffic guidance system related research of the algorithm
Safety Evaluation of The Intersection of Urban Road Traffic 2011.10 - 2012.09
Mentoring Program/Undergraduate Thesis
•River-crossing traffic survey and analysis (river-crossing facilities survey, river traffic flow status)
•River-crossing transportation planning (analysis of the river-crossing traffic status, the future of the traffic demand)
Safety System Design of Cooperative Vehicle in Highway Merge Area 2009.09 - 2009.12
National Undergraduate Transportation Research Competition
•Intersection safety evaluation based on traffic conflict technology
•Set up a safety control system of highway merge area based on Cooperative vehicle
•Use of TransCAD, Trips and other traffic planning software for model building and traffic volume forecast
OTHER EXPERIENCE
•Shanghai International Marathon volunteer 2012.10 - 2012.12
•A member of college basketball team
HOBBIES
•Solve mathematics problems & read English fictions
浏览量:2
下载量:0
时间:
英文简历是使用英文写的简历。英文简历(resume)并无固定不变的单一形式,应聘者完全可以根据个人的具体情况来确定采用何种形式,灵活设计。
Name :YJBYS YJBYSGender :
Registered residence : Nationality :
Wedlock : Age :
Nowaday location : Stature :
Card type :
Career Will
School : Hainan Normal University
Major/Curriculum : Politics
Start working : Within 1 week
Target job position : System Testing QA Project Managaer Reliability Engeneer
Desired salary : 8000~9000Yuan/Month
Target location : Shenzhen Guangdong Dongguan Guangdong
Work experience : 5 years ,10 months Work Experiences
Profession experience :
Language level : English:CET-4
Computer skills : Excellent
Vocational skill/specialty : 1. 6 years experiences on reliability test area for products as Phone,Notebook,Netbook,Pad and All In One computer product.
2. Can draft test specifications,test criterion,training test operator and manage lab.
Self assessment : 1. Confident,Sincerity and Humorous, have good communication and coordination skills,
2. Have a wide interest, such as sporting,reading,music poetry and so on…
Education/Training
Time School Major/Curriculum Education/Training
2002-9To2006-7 Hainan Normal University Politics Bachelor Degree
>>Work Experience So far service for 2 companies 5 years ,10 months Work Experiences
(the company name has been screened) (2011-6 To Present)
Company nature : Taiwan-funded Enterprise
Company profession : Manufacturing
Position name : Reliability Engineer
Monthly salary : Secrecy
Work description : 1. Know well on Motorola mobile phone projects reliability test.
Mechanical section: vibration test, drop test, dust test, loading test, squeeze test, purse test, red dye test, cocktail test, oleic acid test, RCA test, pencil hardness testing, ball drop test, flip life test, keyboard life test,keyboard tactility test,interface life test.etc.
Environmental section: thermal shock test, temperature and humidity test, salt spray test, solar test and so on.
Electronic section: Signal testing, SQE test, EMI testing, Bluetooth test, GPS test, Parametric test, ESD test, Camera test and etc…
Material section: Use microscope and X-ray machine for the Metal and Plastic parts’ film thickness analysis and size section analysis.
2. Hold a new project kick off meeting, to discuss hidden problems with RD in the design stage. Review the problems by weekly,and require RD provide final solutions.Forecast the follow up reliability test possible issues, and keep tracing countermeasures from RD.
3. Prepare test related files,specification and test fixtures. Confirm test samples’ quantity, and test schedule.When testing ongoing,updates test status and schedule to customer regularly. Issue accured,report detailed symptoms and errors to customer in time and hold issue tracing meeting with RD until it was resolved.
4. Summarized issue happend history and final solutions for RD/PE department’s reference, avoid similar problems occurred again.
Reason for quit : Factory Transfer to North of China
(the company name has been screened) (2006-8 To 2011-5)
Company nature : Taiwan-funded Enterprise
Company profession : Computers(Hardware、Network Device)
Position name : Reliability Engineer
Monthly salary : Secrecy
Work description : 1. Acted as HP Notebook/Vodafone Pad/NEC AlO PC Project Manager,leading reliability test for new project from design stage to mass production stage.
2. Familiar with Notebook/Netbook/Pad/AIO PC reliability test principle and test process. according customers’ requirements and control plan, decides test items,test samples,and test schedule.supervises testers reliability testing whether correctly,make a judgment to the test result, review the test report and reply to customers in time.
浏览量:2
下载量:0
时间:
英文简历是使用英文写的简历。英文简历(resume)并无固定不变的单一形式,应聘者完全可以根据个人的具体情况来确定采用何种形式,灵活设计。
name: xxx sex: male
ethnic: chinese political features: members
academic qualifications (degree): bachelor of professional: industrial electric automation
tel :0755-12345678 mobile: 13900000000 email address: quduwen@sohu.com; quduwen@163.com
educational background
graduate institutions: beijing industrial university 1993.9 - 1997.7 industrial electric automation
majors: the principle of self-control, power drag, electronics, automatic test systems, computer organization and structure, and computer hardware and interface circuit design, assembly language programming, c.c + + programming, software engineering principles of computer networks, etc.
other: other training
* microsoft certified systems engineer training courses: windows nt technology, windows nt enterprise, networking with tcp / ip on windows nt, Ⅱ s4.0 windowsnt
* national levels through the examination in english, reading and translation ability on several occasions for the machinery industry press translation of computer books, and has been published.
work experience
* may 1998 --- the company has xx
network systems engineer
● cisco, ibm technical support for networking products
network system (lan and wan) design and planning, to answer user queries, according to user needs the best solution; cisco, ibm networking products on-site debugging and system maintenance
● customer technical training, and internal and technological exchanges and training
the basic principles of network and technology: lan, wan, tcp / ip, atm, as well as cisco, ibm network equipment debugging process; on ibm aix basic systems management and senior management, netview,
nfs, hacmp, etc.
● have taken part in the project
design, installation, commissioning, "jilin 97 projects" - integrated management system in jilin province atm telecommunications network and the host system, changsha cigarette factory, jinzhou cooperative banks, people's education publishing house information systems; the design of the yunnan provincial post and telecommunications office information integration system, radio, film and television in jinan atm broadband integrated services network, cable broadband network in shaanxi province.
september 1996 * march 1998 --- xx company
system administrator / engineer
● chinagbn internet network information center, systems management
proficiency in unix (sun solaris) operating systems, network management and to participate in the formation of a chinagbn internet network center (including network design, installation system, the fbi, maintenance, network programming)
● chinagbn jingqiao six cities network web site building
internet web site to participate in the center and its overall planning and construction of the backbone network and satellite connectivity, satellite network to the backbone, x.25 packet switching, frame relay, isdn and ddn and related equipment to understand
● chinagbn internet network center web system administrator
profile
with extensive work experience, practical responsibility seriously, and have excellent communication skills, has presided over many of the users and technical briefings and training, access to users and companies alike. ministry of electronics industry in the "three gold projects show exhibition style" to the guests on the user group chinagbn green solution.
i character
moderate, modest, self-discipline, self-confidence (based on the person's circumstances).
浏览量:2
下载量:0
时间:
英文简历是使用英文写的简历。英文简历(resume)并无固定不变的单一形式,应聘者完全可以根据个人的具体情况来确定采用何种形式,灵活设计。
Resume
Name: Graduates Employment Network
Gender: Female
Date of birth: 1972-02-16
Mouth: Jiangsu
The current city: Shanghai City
Work experience: five years
The current annual salary: 5-6 million yuan
Mobile phone:
Residential address:
Self evaluation
5 years working experience in mechanical design, by CET-6. Pro-E, familiar with AutoCAD, Solidworks and Office, familiar with the process, can be engaged in the design and development and project management.
Job intention
Target industry: Machinery / equipment / instrument / heavy industry, industrial automation, automobile and spare parts, petroleum / chemical / mineral / Geology
Target position: Mechanical Engineer
Expectations: Shanghai City
Expected salary: salary welfare needs to fill, generally relatively safe negotiable
Time: how long can the arrival of new jobs
Work experience
2007/07 XXX now
Industry: Machinery / equipment / heavy industry
Department of Mechanical Design Engineer
Main responsibilities
1 by the individuals responsible for project, master project schedule, assist business personnel to understand customer needs, design fixture, fixture, equipment modification and field surveying and mapping parts, including assembly drawing, part drawing, BOM list, assist purchasing staff.
2 by the individuals responsible for project, master project schedule.
3 customers are Shanghai GM, Shanghai Volkswagen, Shanghai Natiefu, Wuxi BOSCH, Wuhu United States, Kunshan and Hangzhou etc. universal Fuji.
2003/06 2007/06: Shanghai Keepahead ultrasonic equipment Co., Ltd.
Industry: Machinery / equipment / heavy industry
Department of Mechanical Design Engineer
Main responsibilities:
1 responsible for the project, including equipment assembly and parts production drawings, outsourcing list, pipeline map, assist the purchasing staff to support business personnel, at the same time tracking solution occurs processing manufacturing and assembly debugging problems, and through customer acceptance, and write instructions, sometimes also translated the equipment specifications (export in the English translation).
2 the design of automatic ultrasonic cleaning equipment automatic mechanical arm, through the tunnel drying equipment, automatic high pressure spray, ultrasonic cleaning, wind drying (with the netbelt) and other non-standard equipment.
1998/10 2002/12: Suzhou hongly mould machinery Co. ltd.;
Industry: Machinery / equipment / heavy industry
Technical department technician
Main responsibilities:
The preparation process, and according to the 2D drawings of Singapore engineer design, using Cimtron three-dimensional modeling, and translation of faxes and E-mail. Our products are stainless steel mould of glass.
Project experience
2008/06 2008/07: body machining fixture
Development tools: Pro-e, AutoCAD
Project Description: the fixture fixture for machining workpiece machining center, to the workpiece through the lateral expansion clamping device and the fixing plate, cutting through the spring pin to locate the center hole, take through the length of axis elliptical groove turntable mechanism to realize workpiece.
Responsibility description: responsible for the design of parts and assembly plans, production schedule, follow up the progress, solve the problems in the process of production and assembly.
2007/12 2008/01: a hole position check out
Development tools: Pro-e, AutoCAD
Project Description: the detector used for detecting the position degree of casting hole, products will be placed on the bottom position through a pin to detect the position of the workpiece, the detection position of the other inclined hole made reference plate and pin assembly of the handheld, seized by CMM, if not in the tolerance range of customer requirements in (+ 0.03), need to adjust.
Responsibility description: Design of parts and assembly plans, production schedule, track progress, solve problems, adjust the fixture to meet customer requirements in the tolerance range.
2006/04 - 2006/06: automatic high-pressure spray, ultrasonic cleaning, wind drying equipment production line
Development tools: AutoCAD
Project Description: this production line is used for cleaning and drying of stamping aluminum, steel mesh belt through the motor drive transmission of the workpiece, the first workpiece feeding section, the first and the two or three position is medium pressure spray, fourth, five or six position is the high-pressure spray, through high pressure pump and high pressure spray system, air knife with seventh air compressor station the water cut is eighth station, tunnel oven, final workpiece material.
Responsibilities: assist business personnel to understand customer needs, design and manufacture of the assembly and parts diagram, communication and electrical engineers, support the procurement staff, tracking the progress of solving the production problem, initial customer acceptance records of customer comments, until final acceptance by the customer.
Education and training
1994/09 1998/06: of Wuhan University of science and technology of metallurgical mechanical design and manufacturing automation degree
Certificate
1998/06 master's degree certificate
1996/09 passed the university English six levels
Language ability: English: good
浏览量:2
下载量:0
时间:
英文简历是使用英文写的简历。英文简历(resume)并无固定不变的单一形式,应聘者完全可以根据个人的具体情况来确定采用何种形式,灵活设计。
No.67, Lane123, Job Rd. Job District, Shanghai, China |
(+86) 138-0013-8000 |
service@yjbys.com |
JOB OBJECTIVE | Software Engineer |
IT SKILLS | • | Master user of Microsoft Word, Excel, PowerPoint, Macromedia DWMX, Flash MX and Adobe PS |
• | IBM Certified Database Associate-DB2 Universal Database V8.1 Family |
• | IBM pSerise AIX System Administration-e-server Certified Specialist |
EDUCATION | xx University | 2010-2014 | Tianjin |
School of Electronic Information and Engineering |
• | Vice president Skilled in communicating with team members |
• | Current project:MMO game server design,using Java & IBM DB2,on IBM AIX system in IBM Tech.Center,TJU |
EXPERIENCE | Newhouse International Education Consulting co.,Ltd | 2013/04-Present | Beijing |
CIO & Co-founder |
• | The biggest career consulting team in China |
• | Plan the architecture of the website of the company |
• | Lead a team to actualize the plan |
• | Reseatch English materials and organize the content of the site |
Volunteer Christian Teachers from the US | 2013/03-2013/06 | Tianjin |
Receptionist |
• | Translated daily talks for teachers who are of great religiosity |
• | Schemed part of the teachers activities in Tianjin |
Vitular IT Co.,Ltd | 2012/10-2013/03 | Tianjin |
Game Designer and Programmer |
• | Designed and wrote games for CDMA mobile phone |
• | Mastered Btew platform in 2 weeks by reading plenty of English manuals and supporting materials |
• | Cooperated and intercommunicated with teammates to ensure quality |
• | Solved in a creative way one technical problem of displaying cartoon |
• | Completed 2 projects and submitted |
www.conanren.com | 2009/06-2011/06 | Tianjin |
Chief Site Manager and Administrator |
• | Site Description:a website for comic fans of <Detective Conan> with a forum of over 4,000 members |
• | Planned and wrote lots of documents and manuals for members to detail instrucitons of rule or activity |
• | Read English technical manuals and supporting materials to design and maintain HTML web pages PHP script and security problems |
• | Communicated and cooperated with other site |
• | Solved different kinds of trobules for quality |
Gartner Consulting Inc. | 2009/04-2009/08 | Tianjin |
Web Server Assistant |
• | Top 10 consulting company in US |
• | English is the working language |
• | Assisted to setup the website with CIO |
• | Solved 1 main technical problem:Make aphp script able to log into anotjer server using cookies,e.g.an Email server |
• | Created suitable solution for customers of consulting company |
• | Deeply understood the operation of the company and customers demand |
ENGLISH | • | A good command of spoken and written English,especially in computer-related topics |
SKILLS | • | CET-6 Certificate |
HOBBIES | • | Psychology,Music,E-Sports |
浏览量:2
下载量:0
时间:
英文简历是使用英文写的简历。英文简历(resume)并无固定不变的单一形式,应聘者完全可以根据个人的具体情况来确定采用何种形式,灵活设计。
Resume number: | YJBYS | Updating date: | ||
Name: | Mr. xx | Nationality: | China (Mainland) | |
Current Place: | Fujian | Height/Weight: | 170 cm kg | |
Marital Status: | Single | Age: | 40 years |
Career Objective |
Application type: | Oversea Student | ||
Preferred job title: | Customer & Technology Support: engineer 、 Project/Equipment-Manager/Supervisor/Engineer: 、 Light Industry: | ||
Working life: | 10 | Title: | |
Job type: | Full time | Expected Start date: | In a week |
Expected salary: | ¥8,000~¥9,999 | Preferred working place: | Fujian Hainan Other cities |
Work experience |
|
Educational Background |
Name of School: | SHANGHAI Building Materials Industry College | ||||||||||||||
Highest Degree: | Bachelor | Date of Graduation: | 1996-07-01 | ||||||||||||
Name of Major 1: | industrial control | Name of Major 2: | |||||||||||||
Education experience: |
|
Language Ability |
Foreign Language: | English | Level: | good |
Chinese level: | Cantonese Level: |
Relevant skills and abilities |
2013.5 Get FAE of Advantech Automation Certified 2013.12 Obtain Advantech Certified Professional & Advantech Certified Professional Advanced of Advantech Institut 1998.3 ISO9000 internal auditor training |
Self-recommendation letter |
The good team cooperation spirit. The strong sense of responsibility and working ability Adapt to the new circumstances rapidly. Strong self-culture capability to new knowledge and sharpens own technical. Manner positive enterprising |
浏览量:2
下载量:0
时间:
Professional Title:
Computer Level: junior
Computer Skills:
Strengths: I am skilled in CAD、PRO/E,especially the Sheet Metal Design Module in PRO/E. What's more,I can grasp very well at
project management of product and the advancement of project process.
浏览量:2
下载量:0
时间:
Donald Jobs |
(+86) 138-0013-8000 | service@qiaobutang.com | Gender: Male |
Job Objective: Process Engineer |
EDUCATION |
Jobs University of Technology | Sep.2010 - Jun.2014 |
Bachelor of Industrial Engineering |
• | Courses: ERP, Operations Management for Competitive Advantage, Basic industrial engineering, Technical drawing, Operations Research etc. |
• | Studies excellent scholarship |
MANUFACTURING EXPERIENCE |
Qiaobu Power Holdings Co Ltd | Nov.2013 - Jun.2014 |
Process Engineer Assistant |
• | Producted manufacturing BOM according to the product process design |
• | Responsible for production line SOP production and the production of the wiring harness diagram |
• | Involved in the production process analysis of action research and use IE techniques for process improvement |
Preparation of polyaluminium chloride flocculant | Sep.2013 - Dec.2013 |
Chemical research and development project |
• | Used high alumina cement preparation a polyaluminium chloride flocculant |
• | Collected data, according to the tutor prior patent process improvements, and the experiment independently |
SOCIAL PRACTICE |
Volunteer Activity | Aug.2011 - Sep.2011 |
Critical events dealing |
• | Handled emergencies |
• | Solved management problems exposed in the course |
• | "excellent organizer" |
SKILLS |
AutoCAD, Solidworks drawing software |
Proficient in MS Office |
CET4 |
HOBBIES |
Badminton, swimming |
浏览量:2
下载量:0
时间:
导语:工艺工程师英文简历范文是由读文网小编为你提供的一份适合求职的英文简历,可直接使用或根据实际情况进行修改。
I. Aug. 2008-Dec. 2008,I practiced in all production workshops to know about stamping, painting and welding and process technology of auto of fitting shop.
II. Dec. 2008-Jan. 2010, I was engaged in production control in production department and promotion of lean production. I followed improvement experts who have made site improvement and guidance on Dong’an Auto Engine and Shulan General Machinery for half a month. I could master in elementary knowledge of lean production. I could grasp preparation methods of operation manual and essentials book and working procedure capacity list. And I was in charge of site 5S management of all workshops and daily improvement.
III. Jan. 2010-now, I have been working as site engineer of fitting shop in charge of site technology management and maintenance of standard operation. I participated in change of circle time of workshop and establishment from circles such as workers, machine, stuff to project layout and made follow-up, implementation and confirmation of policies. I amended standard operations of 15 stations of fitting shop and verified the site operation, equipment security capacity, key points guarantee and personnel qualification and workpiece supply. I submitted 18 improvement requirements and constituted 10 measures which effectively enhanced availability rate of work area and process quality assurance ability.
浏览量:2
下载量:0
时间:
Aug. 2008—now, I have been working at the Jilin Automobile Co., Ltd. of FAW
浏览量:2
下载量:0
时间:
|
EDUCATION |
Jobs University | 2012.09-2014.06 |
MSc Financial Mathematics |
• | Relevant courses: Stock Investment, International Economics, Econometrics, Macroeconomics, etc |
• | GPA: 3.9; Rank: 3/49 <Write your GPA or Rank here if it is high, or delete it.> |
Jobs University | 2008.09-2012.06 |
Bachelor of Computer Science and Technology |
• | CUMCM The First Prize (2013) |
• | Outstanding Graduates, National Scholarship (2009) |
SKILLS |
• | Proficient in Matlab, Java, R, SQL, Excel |
• | CFA level 2, 13 ACCA Papers Passed |
• | CET6: 560, IELTS: 7 |
FINANCIAL PROJECT |
Aerospace Securities co. , ltd | 2013.10-2013.12 |
• | Reviewed client files to evaluate alignment of investments with profile |
• | Commended for ability to maintain customer focus while meeting tight deadlines |
• | Confirmed receipt and delivery of securities |
Calyon Alternative Investment Company | 2013.03-2013.07 |
• | Analyzed needs, negotiated sponsorships and presented at five special events featuring industry speakers |
• | Provided leadership to off-shore tech teams via training and analyzing business requirements |
• | Researched of stock index futures price series of statistical arbitrage strategy |
• | Built by MATLAB, R back testing system composed of language and VBA |
The VaR Model to Predict Risk and Evaluate the Financial Markets | 2012.11-2013.02 |
• | Showcased recommendations in advanced PowerPoint presentation and handouts |
• | Analyzed fictitious, publicly traded company; valued securities and intangible assets |
• | Recommended opportunities that would structure capital so as to maximize value |
CAMPUS ACTIVITIES |
A Member of Actuarial Association | 2012.11-2013.02 |
• | Participated in ASCU meeting, organized various activities |
HOBBIES |
Visiting IT BBS |
浏览量:2
下载量:0
时间:
工程师指具有从事工程系统操作、设计、管理、评估能力的人员。工程师的称谓,通常只用于在工程学其中一个范畴持有专业性学位或相等工作经验的人士。今天读文网小编要与大家分享:工业专业工程师英文个人求职简历范本。具体内容如下:
工业专业工程师英文简历
Provide floor support engineering in printed wire assembly (PWA) and subsystem assembly (SSA) areas.
Purchase capital equipment.Interface with vendors. Justify expenditures.
Design plant layout fixtures,and flow charts of material.
Program automatic equipment.
Write process sheets and rework procedures.
Recommend changes to product to allow ease of manufacture.
Implement design changes.Inititate methods and process improvements.
Troubleshoot problems.Effect disposition or rejection of material.
Provide assistance to all other departments.
1984 PRUDENCE D. MCHARRISON LABORATORY,Ruston,LA
浏览量:2
下载量:0
时间:
求职信在谋职中发挥的作用越来越大,往往关乎你的求职成功几率。那关于工程师英文求职信有哪些呢?下面是读文网小编为你整理的工程师英文求职信范文,希望你喜欢。
Dear Ms. Swainsforth:
I am a registered engineer in the state of Michigan, and I am presently seeking a position in the roofing industry. A copy of my resume is enclosed, and I would like to talk with you should you have an appropriate opportunity for me at Kelco Corporation.
My most recent assignment was to manage projects at Forte Products Company to develop products for the commercial roofing industry. Part of my responsibility was to provide technical support to sales people, when they had questions of a technical nature from their engineering or architectural customers.
I have experience in quality assurance and the application of control charting to a large insulation line at Forte Products. This resulted in a 23% reduction in scrap and a 76% reduction in customer complaints.
I am seeking a position as a team leader or manager in product or process development, or in quality assurance. My compensation requirements are in the $65,000 to $70,000 range, and I am open to relocation.--www.d9read.net
I would welcome the opportunity to talk with you and discuss the technical contributions I could make to the Kelco Corporation, especially in the development of exciting new roofing products.
Thank you for reviewing my credentials, and I look forward to hearing from you shortly.
Sincerely, James C. Willison
James C. Willison
看过“工程师英文求职信范文”
浏览量:3
下载量:0
时间: