为您找到与IE工程师英文相关的共200个结果:
ELECTRONICS ENGINEER(Experienced)
Sandy Lin 15/F,TOWER2 ,BRIGHT CHINA,BUILDING1,BEIJING.
BACKGROUND SUMMARY
Over eleven years of extensive computer/electronics experience.Versed in both digital and analog electronics withspecific emphasis on computer hardware/software.Special expertise in system and component evaluation.Network supervisor responsible for installing/maintaining Arcnet LAN system.Proficient in assembly and C programming languages.Excelent communication skills including written,verbal and interpersonal.
PROFESSIONAL WORK EXPERIENCE
Stevenson Data Systems,Los Angeles,CA 1981-1993
Components Evaluation Engineer 1992-1993
Responsible for the characterization and evaluation of, and approved vendors list for:Power supplies,oscillators,crystals,and programmable logic used in desktop and laptop computers.Evaluated and recommended quality components that increased product profitability.Created adn developed power supply test plan used for evqluating third party power supplies.Interacted with vendors to resolve problems associated with components qualification.Technical advisor for Purchasing.Promoted to engineer II.
Design Evaluation Engineer 1990-1992
Evaluated new computer product designs ,solving environmental problems on prototype computers.Conducted systems analysis on new computer profucts to ensure hardware,software and mechanical design integrity.Designed hardware and software for PC,ISA bus programmable load board used for environmental testing.Performed reliability lift testing on computer systems.Installed/maintained 20 user.Novell,Arcnet LAN system.Examined system and sub-system susceptibility to electrostatic discharge in order to meet IEC-801-2 industry standards.Analyzed complete power and load of computer system and subsystem to verify power and load estimations.
Assistant Engineer 1981-1990
Performed extensive hardware evaluation ion prototype computers,tested prototype units for timing violation using the latest state-of-the-art test equipment,digital oscilloscopes and logic analyzers.Performed emvironmental,ESD and acoustic testing.Designed and built a power-up test used to test prototype computers during cold boot.
EDUCATION
Bachelor of Science in Electrical Engineering
--University of Southern California 1990
Associate in Engineering Electronics
--University of Southern California 1981
Job descriptions emphasize candidate's accomploshments.
Work history is stated in reverse chronological order,with most recent employment listed first.
浏览量:1
下载量:0
时间:
Name: | Nationality: | China (Mainland) | |
Current Place: | Guangzhou | Height/Weight: | 170 cm70 kg |
Marital Status: | Single | Age: | 27 years |
Career Objective |
Application type: | Jobseeker | ||
Preferred job title: | Mechanical engineer: Mechanical engineering 、 Project manager/administrator: Mechanical engineering 、 Quality management/test manager(QA/QC Manager: Mechanical engineering | ||
Working life: | 5 | Title: | Middle title |
Job type: | Full time | Expected Start date: | In two weeks |
Expected salary: | ¥5,000--¥8,000 | Preferred working place: | Guangdong province Guangdong province Guangdong province |
Work experience |
浏览量:2
下载量:0
时间:
以下是读文网小编收集整理的《IE高级工程师个人简历模板》全部内容,希望对大家有所帮助,如果您喜欢小编的推荐,请继续关注读文网
姓名: 冯先生 性别: 男
婚姻状况: 已婚 民族: 汉族
户籍: 河南-漯河 年龄: 31
现所在地: 广东-东莞 身高: 172cm
意向地区: 广东-东莞、 浙江-杭州、 广东-广州、 广东-深圳、 广东-珠海
意向职位: 工业/工厂类-工程经理/主管
工业/工厂类-制造课长
寻求职位: 工程经理/主管、 生产经理/主管、 高级工程师
教育经历
2012-09 ~ 至今 广东工业大学 工商管理 本科
1999-09 ~ 2002-07 西安航空高等职业技术学院 模具设计与制造 大专
培训经历
2006-05 ~ 2006-05 百乔罗管理咨询上海有限公司 精益生产
**公司 (2011-11 ~ 2013-07)
公司性质: 外资企业 行业类别: 其它生产、制造、加工
担任职位: IE高级工程师 岗位类别: 工程经理/主管
工作描述: 产品介绍:光学眼镜
责任描述
1、文件编制的实施与运用管控SOP、工艺流程、装配清单,标准工时评估,动作研究改善、360项目推动
2、NPI导入、新项目的筹建与实施,进度的推动与完善,项目总结
3、生产流程排拉改善,提高优化生产效率改善,辅助治具的设计提案,部品及物料替换等降低成本改善。
4、制定IE工作组整体规划及相关制度建设、对IE及相关人员指导、培训IE管理基本手法及应用。
5、指导IE工程师日常工作及安排,对人、机、料、法、环等相关因素综合的分析研究改善,提供科学合理的工作方法,对生产流程 机器、人员、物料配置和操作工艺等提出改善方案。
6、设计新厂房及新产线规划和安排。
7、新产品研发期间的参与,确认及试产状况的工艺、流程、控制等相关事宜,跟进问题点的改善。
**公司 (2007-08 ~ 2011-10)
公司性质: 外资企业 行业类别: 其它生产、制造、加工
担任职位: PIE高级工程师 岗位类别: 工程经理/主管
工作描述: 台资企业:
产品介绍:DVD光学头制造
责任描述;
1.新产品导入及试产跟进,新机种流程规划,工艺文件编制。
2.标准工时制定与标准产能制定,维护及更新
3.试中所出现的异常问题;同时负责SOP、QC工程表、流程图、PFMEA等技术文件制订及完善。
量产阶段,跟进制程改善,作业良率,降低设备、用人成本,FA模块人员技能培养方案的制定与实施;
产品功能分析及不良品分析;维修人员的技术支持与指导;FA模块技术平台的建立和维护。
4.制定和完善设备的设备管理制度及设备的维修,安装与调试、维护保养文件的编写;
5.编制各种报表,总结设备动力管理各项指标,并加以科学分析,不断提高设备效率的改善提升;
6.制定设备年度与月度维修保养计划,对机器定期维护,清除潜伏性问题,对机器进行局部改善;
7.负责新产线的安装、调试,协助、配合供应商完成新设备的安装、调试;
8.负责无尘室ESD、particle等方面的维护、维修;
9.生产过程中产品问题的分析、产品品质的改进优化;
10.负责每月的TPM,及时对工作进行总结,并写成报告、参考文献,对工作成果进行分析推广。
**公司 (2005-06 ~ 2007-03)
公司性质: 外资企业 行业类别: 其它生产、制造、加工
担任职位: IE工程师 岗位类别: IE/工业工程师
工作描述: 台资企业:
产品介绍:音响电器﹑MP3﹑电子零件﹑混频器﹑扬声器﹑电线制品制造。
责任描述
1、工时、定额、流程、SOP的制定,以及生产现场的排拉与指导。
2、生产辅助治具的设计及治作。
3、优化生产线、物流、场地布置等分析改善,提高生产效率及改善。
4、新产品导入及试产跟进的工艺文件制作。
5、合理化建议提案宣导、推广、实施及成果评审,合理化系统平台维护;
6、制定项目改善计划书,实施项目改善过程统筹和指导;项目改善成果评估与总结。
7、推行精益生产,成功推行单件流示范组,定员改善推行,快速换产优化项目。
8、协助产前准备/生产管理/产后总结。
**公司 (2003-03 ~ 2005-02)
公司性质: 外资企业 行业类别: 机械制造、机电设备、重工业
担任职位: IE工程师 岗位类别: 机械工艺师
工作描述: 本部门成立专案团队,通过产能分析、瓶颈制程改善、品质提升.
责任描述:
1.针对模架加工流程分析,找出瓶颈制程;
2.对瓶颈制程进行效率提升方案(遮蔽制程)设计,并推动表面处理厂进行改善;
3.针对装拆夹线进行线平衡改善和优化,减少人员浪费和装夹不良;
4.标准工时制定;
5.生产线平衡改善;
6.治具、人力、设备等资源规划;
7.人力精实项目推动;
8.车间内、外物流优化;
9.VSM价值流改善推动;
10.人因工程改善推动;
项目经验
UV自动点胶转盘 (2007-08 ~ 2011-10)
担任职位: 项目负责人
项目描述: UV自动点胶转盘,团队开发,直接提示生产效率25%
责任描述: 1.项目小组组长
通过APQP前期预测分配,及受益前评估,工程治具验证。
技能专长
专业职称:
计算机水平: 高校非计算机专业二级
计算机详细技能: 熟练操作WORD、EXCEL等办公软件及AUTOCAD、CAXA等绘图软件
技能专长: 熟练运用IE七大手法,精益生产项目推动,QC七大手法,熟悉FMEA、CP、SPC等品质管理手法;
语言能力
普通话: 流利 粤语: 差
英语水平: CET-4 口语一般
日语: 一般
求职意向
发展方向: 具有10年制造业PIE技术及相关管理经验,精通IE手法在工作中的应用,工作积极负责,善于沟通协调,热情较强的敬业精神
具有6年以上电子光学制造业PIE工作经验
具有带领IE团队工作3年以上工作经验
具有系统IE平台建立经历及规划能力
精通制造业精益生产活动开展,能综合应用精益生产的工具VSM分析制程中的问题,并有团队工作实施成功案例
了解并掌握电子制造业各流程工艺,涉及产品包括,DVD/电源/音箱/喇叭
具有工时系统、效率系统、生产力评估系统、资源需求评估系统等建立导入经验工作经历
其他要求: 希望能在公司中得到更多培训机会,如 ISO管理,项目管理,工程技术管理,英语等培训;能在工作中得到更多锻练,进步,能够发挥自己的特长;不断进步;不断完善自我,有出国的机会更好。
自身情况
自我评价:
十年精益化实践工作经验,在精益生产工程及品質方面均有獨到的見解及處理能力﹐熟識产品流程管理,产品立项及可行性分析,熟悉模具結構﹐塑膠生產流程與工藝﹐在光学制造及電子方面均有丰富的經驗。QC Seven Tools, APQP, PPAP, FMEA, SPC, and MSA各类品质统计工具。有较强的工作责任心,工作积极热情﹑具有敏锐的观察力﹑较强的组织协调能力,意志坚强﹑学习能力强﹑接受能力强﹑应变及處理能力强,较强的沟通、谈判能力,较强的工作压力承受能力,同时具有多年外企管理经验。
浏览量:2
下载量:0
时间:
以下是读文网小编收集整理的《IE工程师英文简历》全部内容,希望对大家有所帮助,如果您喜欢小编的推荐,请继续关注读文网。
Name: Mr. R Gender: Male
Wedlock: Single Nation: Han
Residence: Guangdong-Qingyuan Age: 28
Location: Guangdong-Dongguan Height: 173cm
Target Locations: Guangdong
Target Positions: Industry/Factories-Industrial Engineer
Industry/Factories-Production Management Clerk
Industry/Factories-Technic Engineer
Target Jobs: Industrial Engineer、 Lean Engineer
Education
2005-09 ~ 2009-07 GuangDong University of Technology Industral Engineering Bachelor Degree
Training
2008-12 ~ 2008-12 Guopei Certificate Internal Quality Auditor Training &Qualification
【company name】 (2011-07 ~ Present)
Company Type: Private Enterprise Company Category: Electrical,Micro-electronics
Job Title: Industrial Engineer Positions: Industrial Engineer
Job Description: 1.NPI: process planning, fixture and equipment planning, prepare process checklist
2.Standard time and capacity evaluation, line balance and prepare SOP for new products
3.Maintain the usage of the consumptive material, standard time and capacity
4.Perform line balance and improve process to rise capacity
5.Design and improve the tools and fixture in the work site
6.Monitor the efficiency of the production line, analyze these reasons manpower, machine, material , environment, method, push the relative dept to solve issues
7.Kaizen project planning and push: Auto-machine introduce, production way optimize, manpower and material saving, etc
Career Highlight:
1.Auto-welding machine introduce: welding process operator saving(16 operators-12 operators=4 operators), line balance rate upgrade from 83% to 91%, solder wire saving 3.2grams, cost of solder wire saving 1.6 yuan RMB for each PCBA.
2.Auto-packaging production line planning and implement: master carton packaging operator saving, every production line deploy 2 packaging operators for 8 lines, after introduce the new equipment it takes only 5 operator to seal the master carton
3.Rear cabinet pre-process and final assembly combine: manpower saving include 1 conveyer, 1 visual inspector, 1 loading operator and 1unloading operator(total 4 operators), and saving the usage of bubble bag and partition board
4.Decorative plate incoming package improvement: change the package material and simplify package way to reduce pack cost(from 0.13yuan to 0.09yuan RMB) and cut down unpack operation time( saving 12 seconds)
5.Cooperate with RD to change PCBA process from dispensing process to solder paste process, in order to cut down welding failure rate after wave-soldering. In this case charge of PCBA fixture design and improvement evaluation(repairing welding time 140sec reduce to 70sec,4 repair welding operators cut down to 2 operators)
6.According to the small order quantity of the product, study the less humanizing process for small products to reduce the change over loss time(38 operators*30minute-
20 operator*40minutes=340minutes) and improve 8% of the motion effective rate
Reason for Leaving: Not very good economic benifit of the company,little chance to promote both in position and welfare
【company name】 (2009-07 ~ 2011-06)
Company Type: Joint Venture Company Category: Electrical,Micro-electronics
Job Title: Junior Engineer Positions: Industrial Engineer
Job Description: 1.Establish and maintain the standard labor time, perform line balance to improve production capacity
2.Load capacity assessment: Base on the MPS and the capacity of production line to forecast the workforce requirement
3.Prepare the cost study report for new products, labor rate evaluate basis on factory operating cost, provide quotation to customer for special process
4.Prepare the workshop layout and line layout design basis on logistics analysis
5.Research and develop new packaging method, develop new suppliers for packing material, make order for new packing material and follow up the schedule
6.Deal with customer complaint and settle products packaging issue, improve packaging method to satisfy customer
Career Highlight:
1. Function test man-machine operation improvement: cooperate with TE to disassemble
and rearrange test item, and modify the way of program display in the monitor, in order
to realize one person simultaneously operate two test machine
2. Line balance improvement: provide the cycle time of each model to set up assemble line speed, and upgrade the line balance rate to 80% above for all model
Reason for Leaving: Not a very good department to pratice and learn IE skill,seek more chance to enhance myself
Special Skills
Professional Title:
Computer Level: national computer exam. grade 3
Computer Skills: 1.Be familiar with Windows,be good at Microsoft office software;
2.Have passed National Computer Rank Exam of database technology ;
3.Mastery in Auto CAD of computer aided design software;
Strengths: 1.Be familiar with method study and standard time measurement, know well about Work study technology including 5W1H inquire skill and ECRS four principles
2.Mastery in IE seven techniques, comprehend production management essentials
And the activity about 5S.
3.Be familiar with logistics analysis during the production process, be capable of
Facility planning and machine layout
4.Know about the basis quality management tools, such as Seven QC Methods and FMEA technique
Language Skills
Chinese: Good Cantonese: Good
English Level: CET-4
English: Good
Career Objective
Career Direction: A position as IE engineer or Lean engineer which will use the IE concept and lean production to reduce the cost of enterprise running ,promote the competitive strength,as a result to achieve the win-win target with enterprise.
Requirements:
Self Info.
Self Assessment: 1.Bachelor degree in Industrial Engineering, have good sense in cost down, and have successful case of improvement
2.Worked in Taiwan electronic company for almost two year, be familiar with SMT, DIP, repair welding, final assembly, test and packing process
3.Strong hands-on skills, have experience in guiding operation for new production first MP
4.Good skill in Auto-CAD, can design and make fixture in the workshop
5.Good communication and organization skill in working with other department, have some experience in training
6.Responsibility for work and a man of great loyalty, able to learn, patient and positive.
浏览量:2
下载量:0
时间:
个人简历是求职者给招聘单位发的一份简要介绍。包含自己的基本信息:姓名、性别、年龄、民族、籍贯、政治面貌、学历、联系方式,以及自我评价、工作经历、学习经历、荣誉与成就、求职愿望、对这份工作的简要理解等。
姓名: 黄先生 性别: 男
婚姻状况: 未婚 民族: 汉族
户籍: 广西-梧州 年龄: 29
现所在地: 广东-东莞 身高: 170cm
希望地区: 广东-东莞、 广东-深圳、 广东-广州
希望岗位: 工业/工厂类-IE/工业工程师
寻求职位: IE工程师、 精益生产工程师、 精益生产专员
教育经历
2004-09 ~ 2007-07 广西生态工程职业技术学院 生物技术应用 大专
**公司 (2011-09 ~ 2013-04)
公司性质: 私营企业 行业类别: 电力、电气、水利
担任职位: IE工程师 岗位类别: IE/工业工程师
工作描述: 职责:
1、确定作业标准,标准工时,维护标准工时库,产能及人力需要评估;
2、制品工程的规划与设计,工装、夹具的需求与设计方案提出;
3、保证产线平衡率达标,制程维护与改善,有计划地提升产能;
4、协力厂商制程能力评审与辅导;
5、主导工艺改善,处理生产线日常问题,判定延误工时;
6、产品各流程分析,FLOW CHART,SOP制作与重工流程;
7、辅料样品确认,准确计量辅料用量,出辅料用量,出辅料用量BOM;
8、熟悉焊接技术与电源制造流程;
9、参加相关部门主导的产品质量分析会,以保证原因分析准确性及改善方案的可行性;
10、对产品实现过程的各阶段各种报表进行分析,提出制程改善方案,并及时准确反馈给相关部门;
11、参与LED电源新产品评审、试产、量产,新产品报价,正常生产跟踪、反馈、改善。
项目一:2011年9月-11月,针对出英国BT电源成立外观改善专案小组,组织生产、品管、物控进行为期3个月定期检查、总结、执行、计划的循环管理,使得产品外观不良率从20%下降到7%;
项目二:2012年9月份,针对某出省内龙头照明LED电源产能评估、分析、改善、维护,时产能从300PPH提升至550PPH;
项目三:2012年11月份,主导手加工计件工时工价建立,以及完善,在人力成本趋高背景下,很大程度提高员工工作积极性。
总结:
1、在职期间,能很好处理与上司、本部门同事及外部门同事之间的关系,在融洽的工作氛围中更好地开展工作;
2、大量的日常品质异常处理工作、锻炼敏捷的分析、总结、沟通、执行能力;
3、合理安排工作时间,在完成日常工作情况下,按期完成上司交代的临时任务,并定期汇报工作直至CLOSE。
离职原因: 换个空间
**公司 (2009-04 ~ 2011-06)
公司性质: 外资企业 行业类别: 电子、微电子技术、集成电路
担任职位: 高级IE 岗位类别: IE/工业工程师
工作描述: 工作描述:
生产工艺的跟踪及处理;
SOP的制作及维护;
生产工时的评定;
生产线平衡改善;
新产品下线跟踪及问题反馈;
生产辅助夹具的设计;
多能工的培训;
协助公司开展7S活动;
协助高层就精益生产的方针管理进行展开;
对各个部门精益生产理念和工具的支持等
离职原因: 求成长
**公司 (2007-05 ~ 2008-12)
公司性质: 私营企业 行业类别: 教育、培训
担任职位: 岗位类别: 销售助理
工作描述: 工作职责:
进行制造业公开课客户的开发、维护,并完成业绩目标;
负责海外研修课程全国客户的开发、跟踪及维护;
不定期对团队成员进行销售及心态方面的培训;
负责分公司的网络维护、分公司各种活动的PPT制作及回放;
负责组织员工对每次新课程的内容及讲师背景进行培训;
培训、引导新员工、有针对性培养储备人才;
2007年11月份分公司举办“白云杯”登山比赛,带领小组获取第一名;
2008年4月份 公司上海总部举办4周年庆典,代表分公司参加演出“三句半”节目并获得好评;
2008年6月份分公司组织火炉山“六月狂欢”拓展活动带领小组获取总分第一名;
工作总结:
在这家公司接触了很多经过整合的先进的理念、管理方法、做人做事的原则;
尤其锻炼了我的沟通表达和团队组织能力;
因为该公司专注于制造业企业培训,所以在职期间对制造业企业的现场改善有了深刻的认识、初步了解8大浪费、5S、再到精益生产,了解日本丰田的先进管理方式以及在TPS管理方式下形成的企业文化;
了解很多优秀企业能够持续发展的原因;
接触的客户都是企业中高层,他们的职业涵养及为人处世方式都深深影响了我;
对制造业企业和服务型企业管理的共通性有一定的认识;
离职原因: 到莞谋发展
技能专长
专业职称:
计算机水平: 初级
计算机详细技能: OFFICE应用 POHTOSHOP
技能专长: 一年团队管理经验;
一年精益生产理念学习经验;
多次专案推动经验。
语言能力
普通话: 流利 粤语: 一般
英语水平: 一般
求职意向
发展方向: 有一定的团队组建及管理经验;
擅长方针管理展开相关工作;
车载播放器、开关电源、LED电源等生产工艺。
其他要求:
自身情况
自我评价: 本人性格沉稳、乐观向上、好学、团结、乐于助人,喜欢挑战自我,具有较强的洞察、分析、总结能力,良好的沟通及表达能力,强烈的团队协作意识。
兴趣爱好: 推理片、战争片、台球、羽毛球、自行车、爬山、唱k
浏览量:2
下载量:0
时间:
个人简历是求职者给招聘单位发的一份简要介绍。包含自己的基本信息:姓名、性别、年龄、民族、籍贯、政治面貌、学历、联系方式,以及自我评价、工作经历、学习经历、荣誉与成就、求职愿望、对这份工作的简要理解等。
姓名: 郑先生 性别: 男
婚姻状况: 已婚 民族: 汉族
户籍: 河南-其他 年龄: 30
现所在地: 广东-东莞 身高: 172cm
希望地区: 广东-东莞
希望岗位: 工业/工厂类-IE/工业工程师
教育经历
2000-09 ~ 2004-07 西安思源学院 工业工程 本科
培训经历
2004-09 ~ 2004-11 北大青鸟计算机培训西安分部 Atuo CAD制图
**公司 (2012-03 ~ 至今)
公司性质: 私营企业 行业类别: 电子、微电子技术、集成电路
担任职位: IE工程师 岗位类别: IE/工业工程师
工作描述: ∮新产品评估,试产至量产的导入与跟进;
∮产能的评估与制定,标准工时的测定;
∮百级、千级无尘室规划与施工管理;
∮制程改善,效率提升专案;
∮设备评估与嫁动率分析;
∮TP产品的制程参与。
**公司 (2011-11 ~ 2012-03)
公司性质: 外资企业 行业类别: 电子、微电子技术、集成电路
担任职位: IE工程师 岗位类别: IE/工业工程师
工作描述: ∮新产品评估,试产及量产流程的跟进;
∮产能的评估与制定,标准工时的测定;
∮车间布局及产线设置,生产线产能评估;
∮制程改善的设计与评估;
∮设备评估与嫁动率分析;
**公司 (2010-01 ~ 2011-10)
公司性质: 外资企业 行业类别: 电子、微电子技术、集成电路
担任职位: SMT-IE工程师 岗位类别: IE/工业工程师
工作描述: ∮新产品评估,试产及量产流程的跟进;
∮产能的评估与制定,标准工时的测定;
∮车间布局及产线设置,生产线产能评估;
∮CELL线的导入与设计;
∮制程改善的设计与评估;
∮设备评估与嫁动率分析;
∮从2010年10月转为SMT制程工程师,负责Sony以及Microsoft和华硕品牌,涉及到Camera,Mouse,Bluetooth headset,DVD等机种。
**公司 (2006-09 ~ 2009-12)
公司性质: 外资企业 行业类别: 其它生产、制造、加工
担任职位: IE高级工程师 岗位类别: IE/工业工程师
工作描述: ∮新产品评估,试产及量产流程的跟进;
∮产能的评估与制定,标准工时的测定;
∮车间布局及产线设置,生产线产能评估;
∮CELL线的导入与设计;
∮制程改善的设计与评估;
∮设备评估与嫁动率分析;
**公司 (2004-07 ~ 2006-09)
公司性质: 私营企业 行业类别: 其它生产、制造、加工
担任职位: IE工程师 岗位类别: IE/工业工程师
工作描述: ∮新产品评估,试产及量产流程的跟进;
∮产能的评估与制定,标准工时的测定;
∮车间布局及产线设置,生产线产能评估;
∮制程改善的设计与评估;
∮设备评估与嫁动率分析;
技能专长
专业职称:
计算机水平: 中级
计算机详细技能: 熟练使用办公自动化软件;
熟练使用AUTO CAD绘图软件;
熟悉ERP企业资源管理系统以及ERP系统的使用。
技能专长: 掌握IE技能,熟练使用IE七大手法;
掌握QC七大手法分析和解决问题;
熟悉模具结构、模具制作以及调试模具生产;
新产品跟进及流程设计。
语言能力
普通话: 流利 粤语:
英语水平: 英语专业 初级 口语一般
英语: 一般
求职意向
发展方向: 寻求职位: 1.IE工程师; 2.SMT制程工程师; 3.PE工程師
寻求职位:1 IE工程師 2 SMT制程工程师 3 產品工程師(Mouse,Camera,TP类)
工业工厂类企业,充分发挥自己所掌握IE知识,使自己的专业知识与新产品开发经验相结合,加快公司向JIT生产迈进的步伐。
其他要求: 继续工业工程本专业发展,一展所长。
自身情况
自我评价: 掌握扎实的IE技能,并熟练运用IE技能解决实际生产中出现的和客观存在的一些生产浪费问题与技术瓶颈难题。
§具有新模试做跟进经验,擅长新产品流程设计与量产导入;
§熟悉标准工时及SOP的制订,擅长人机分析及产能设定;
§擅长工夹具设计与改善,工作方法与环境的改善;
§熟练运用IE七大手法进行现场改善及生产效率的提升;
§善于与第一生产现场员工的沟通与协调,有利于改善的执行 与推进;
§有良好的团队合作精神和强烈的工作责任感。
浏览量:2
下载量:0
时间:
简历即对履历的简要陈述,又称履历表,英文简称CV,常用于个人求职、申请,但也可作为非求职者的经历简述。简历记载一个人的教育学历、专长以及就业经验,有时会补充个人特质、兴趣或期许。主要目的经常是求职者用以取得面试或访谈机会的工具,又由于它经常是第一份征才部门或学术机构挑选候选人的过滤依据,其重要性可见一斑。
姓名: 周先生 性别: 男
婚姻状况: 未婚 民族: 汉族
户籍: 江西-南昌 年龄: 27
现所在地: 江西-南昌 身高: 172cm
希望地区: 江西-南昌
希望岗位: 电子/电器/元件类
工业/工厂类-PE/产品工程师
工业/工厂类-工艺工程师
寻求职位: PE、 IE、 工艺工程师
教育经历
2005-09 ~ 2009-06 南昌航空大学 电子信息工程 本科
2002-09 ~ 2005-07 南昌县莲塘三中 高中学习 高中
培训经历
2009-12 ~ 2010-01 广东省质量协会 TQM全面质量管理 培训考试合格
**公司 (2011-03 ~ 2013-01)
公司性质: 外资企业 行业类别: 其它生产、制造、加工
担任职位: PIE工程师 岗位类别: 其他相关职位
工作描述: ATL(Amperex Technology Limited)东莞**源科技有限公司是日本TDK集团的全资企业,是全球仅次于Sony的第二大聚合物锂离子电池生产商,苹果Iphone Ipad锂电池供应商,2007年荣登《福布斯》“中国潜力100企业”排行榜第13名
1.生产设备日常维护与调试
2.负责跟进锂离子电芯发生的制程品质问题,并针对问题分析,提出改善对策
3.SOP审核,作业的标准化指导
4.新产品试产工艺确认与工艺指导,提出改善措施并跟进改善结果
5.电气类生产治工具的设计、改良
6.培训资料整理,关键工位的培训、指导
离职原因: 回乡发展
**公司 (2009-02 ~ 2011-03)
公司性质: 股份制企业 行业类别: 计算机硬件
担任职位: PIE工程师 岗位类别: 其他相关职位
工作描述: **企业机构是目前中国大陆最大的电脑电源制造基地,连续十年国内市场占有率第一位,世界第五位。
1.德宙CNC八轴自动绕线包胶机程序编写与日常调试。
a.经历了新开变压器部门所有线别安装及调试工作。
b.入职以来,先后负责共模电感(EE25)全自动流水生产线、消费变压器(EEL19)自动线(5台自动绕线包胶机、4台包胶机)、充电器变压器(EE13)自动线(4台自动绕线包胶机)、主变压器(ERL35)自动线(2台自动绕线包胶机、12台包胶机)、低频电感(PFC电感)自动线(1台自动绕线包胶机)的日常调试以及程序修改、
编写等方面工作以及制程不良分析处理工作。
2.各线别高压仪器、综合测试仪等各测试仪器日常调试、设定及不良控制。
3.负责跟进电子变压器发生的制程品质问题,并针对问题分析,提出改善对策。
4.新产品试产工艺确认与工艺指导,提出改善措施并跟进改善结果。
5.SOP审核,作业的标准化指导。
6.生产治工具的设计、改良。
7.生产设备、仪器的试用及使用的可行性评估。
8.新物料、代用料、特采料的使用评估跟踪判定。
9.培训资料整理,关键工位的培训、指导。
离职原因: 个人发展
技能专长
专业职称:
计算机水平: 全国计算机等级考试二级
计算机详细技能: >08年5月至7月 参加全国CAD(PROTEL)高级学习期满,经考核成绩合格
>08年9月 通过全国计算机二级(C语言)考试
技能专长: >熟练掌握德宙CNC自动绕线机程序编写和调试,以及维护方面的工作
>熟悉变压器加工工艺,产线制程异常的分析处理,以及测试方面调试工作
>熟悉SPC统计方法,TQM全面质量管理以及品保七大手法
>熟练掌握了常用的办公软件、ERP软件、PDM、AUTO-CAD软件和一些数控和电子方面的知识.
>能用Protel99se(CAD)设计制作SCH及PCB板、会简单的单片机汇编语言编程和操作、电路板手工绘制与焊接
>系统的学习了计算机语言(C++,C#)等,通过了国家计算机二级考试认证(C语言).
>有一定的数电和模电基础,熟练C语言和汇编语言编程和操作
语言能力
普通话: 一般 粤语:
英语水平: CET-4
英语: 良好
求职意向
发展方向: 做一名出色工程师,把岗位知识深层次学透,拥有岗位的强项,向着工程主管和工程经理方向发展
对工作的态度:责任心强,遇到困难不轻易没有办法。
其他要求:
自身情况
自我评价: 热爱体育运动(足球、篮球等),积极向上,处事沉着自信,积极果断,适应性强,善于同同他人进行沟通与协作,崇尚团队合作精神,勤奋务实。
对工作的态度:责任心强,遇到困难不轻易没有办法。
真诚希望能成为贵公司的一员,共同实现个人和公司的理想
兴趣爱好: 热爱体育运动(足球、篮球等),积极向上,处事沉着自信,积极果断,适应性强,善于同同他人进行沟通与协作,崇尚团队合作精神,勤奋务实
浏览量:3
下载量:0
时间:
英文简历是使用英文写的简历。英文简历(resume)并无固定不变的单一形式,应聘者完全可以根据个人的具体情况来确定采用何种形式,灵活设计。
Name :YJBYS YJBYSGender :
Registered residence : Nationality :
Wedlock : Age :
Nowaday location : Stature :
Card type :
Career Will
School : Hainan Normal University
Major/Curriculum : Politics
Start working : Within 1 week
Target job position : System Testing QA Project Managaer Reliability Engeneer
Desired salary : 8000~9000Yuan/Month
Target location : Shenzhen Guangdong Dongguan Guangdong
Work experience : 5 years ,10 months Work Experiences
Profession experience :
Language level : English:CET-4
Computer skills : Excellent
Vocational skill/specialty : 1. 6 years experiences on reliability test area for products as Phone,Notebook,Netbook,Pad and All In One computer product.
2. Can draft test specifications,test criterion,training test operator and manage lab.
Self assessment : 1. Confident,Sincerity and Humorous, have good communication and coordination skills,
2. Have a wide interest, such as sporting,reading,music poetry and so on…
Education/Training
Time School Major/Curriculum Education/Training
2002-9To2006-7 Hainan Normal University Politics Bachelor Degree
>>Work Experience So far service for 2 companies 5 years ,10 months Work Experiences
(the company name has been screened) (2011-6 To Present)
Company nature : Taiwan-funded Enterprise
Company profession : Manufacturing
Position name : Reliability Engineer
Monthly salary : Secrecy
Work description : 1. Know well on Motorola mobile phone projects reliability test.
Mechanical section: vibration test, drop test, dust test, loading test, squeeze test, purse test, red dye test, cocktail test, oleic acid test, RCA test, pencil hardness testing, ball drop test, flip life test, keyboard life test,keyboard tactility test,interface life test.etc.
Environmental section: thermal shock test, temperature and humidity test, salt spray test, solar test and so on.
Electronic section: Signal testing, SQE test, EMI testing, Bluetooth test, GPS test, Parametric test, ESD test, Camera test and etc…
Material section: Use microscope and X-ray machine for the Metal and Plastic parts’ film thickness analysis and size section analysis.
2. Hold a new project kick off meeting, to discuss hidden problems with RD in the design stage. Review the problems by weekly,and require RD provide final solutions.Forecast the follow up reliability test possible issues, and keep tracing countermeasures from RD.
3. Prepare test related files,specification and test fixtures. Confirm test samples’ quantity, and test schedule.When testing ongoing,updates test status and schedule to customer regularly. Issue accured,report detailed symptoms and errors to customer in time and hold issue tracing meeting with RD until it was resolved.
4. Summarized issue happend history and final solutions for RD/PE department’s reference, avoid similar problems occurred again.
Reason for quit : Factory Transfer to North of China
(the company name has been screened) (2006-8 To 2011-5)
Company nature : Taiwan-funded Enterprise
Company profession : Computers(Hardware、Network Device)
Position name : Reliability Engineer
Monthly salary : Secrecy
Work description : 1. Acted as HP Notebook/Vodafone Pad/NEC AlO PC Project Manager,leading reliability test for new project from design stage to mass production stage.
2. Familiar with Notebook/Netbook/Pad/AIO PC reliability test principle and test process. according customers’ requirements and control plan, decides test items,test samples,and test schedule.supervises testers reliability testing whether correctly,make a judgment to the test result, review the test report and reply to customers in time.
浏览量:2
下载量:0
时间:
英文简历是使用英文写的简历。英文简历(resume)并无固定不变的单一形式,应聘者完全可以根据个人的具体情况来确定采用何种形式,灵活设计。
name: xxx sex: male
ethnic: chinese political features: members
academic qualifications (degree): bachelor of professional: industrial electric automation
tel :0755-12345678 mobile: 13900000000 email address: quduwen@sohu.com; quduwen@163.com
educational background
graduate institutions: beijing industrial university 1993.9 - 1997.7 industrial electric automation
majors: the principle of self-control, power drag, electronics, automatic test systems, computer organization and structure, and computer hardware and interface circuit design, assembly language programming, c.c + + programming, software engineering principles of computer networks, etc.
other: other training
* microsoft certified systems engineer training courses: windows nt technology, windows nt enterprise, networking with tcp / ip on windows nt, Ⅱ s4.0 windowsnt
* national levels through the examination in english, reading and translation ability on several occasions for the machinery industry press translation of computer books, and has been published.
work experience
* may 1998 --- the company has xx
network systems engineer
● cisco, ibm technical support for networking products
network system (lan and wan) design and planning, to answer user queries, according to user needs the best solution; cisco, ibm networking products on-site debugging and system maintenance
● customer technical training, and internal and technological exchanges and training
the basic principles of network and technology: lan, wan, tcp / ip, atm, as well as cisco, ibm network equipment debugging process; on ibm aix basic systems management and senior management, netview,
nfs, hacmp, etc.
● have taken part in the project
design, installation, commissioning, "jilin 97 projects" - integrated management system in jilin province atm telecommunications network and the host system, changsha cigarette factory, jinzhou cooperative banks, people's education publishing house information systems; the design of the yunnan provincial post and telecommunications office information integration system, radio, film and television in jinan atm broadband integrated services network, cable broadband network in shaanxi province.
september 1996 * march 1998 --- xx company
system administrator / engineer
● chinagbn internet network information center, systems management
proficiency in unix (sun solaris) operating systems, network management and to participate in the formation of a chinagbn internet network center (including network design, installation system, the fbi, maintenance, network programming)
● chinagbn jingqiao six cities network web site building
internet web site to participate in the center and its overall planning and construction of the backbone network and satellite connectivity, satellite network to the backbone, x.25 packet switching, frame relay, isdn and ddn and related equipment to understand
● chinagbn internet network center web system administrator
profile
with extensive work experience, practical responsibility seriously, and have excellent communication skills, has presided over many of the users and technical briefings and training, access to users and companies alike. ministry of electronics industry in the "three gold projects show exhibition style" to the guests on the user group chinagbn green solution.
i character
moderate, modest, self-discipline, self-confidence (based on the person's circumstances).
浏览量:2
下载量:0
时间:
英文简历是使用英文写的简历。英文简历(resume)并无固定不变的单一形式,应聘者完全可以根据个人的具体情况来确定采用何种形式,灵活设计。
Resume
Name: Graduates Employment Network
Gender: Female
Date of birth: 1972-02-16
Mouth: Jiangsu
The current city: Shanghai City
Work experience: five years
The current annual salary: 5-6 million yuan
Mobile phone:
Residential address:
Self evaluation
5 years working experience in mechanical design, by CET-6. Pro-E, familiar with AutoCAD, Solidworks and Office, familiar with the process, can be engaged in the design and development and project management.
Job intention
Target industry: Machinery / equipment / instrument / heavy industry, industrial automation, automobile and spare parts, petroleum / chemical / mineral / Geology
Target position: Mechanical Engineer
Expectations: Shanghai City
Expected salary: salary welfare needs to fill, generally relatively safe negotiable
Time: how long can the arrival of new jobs
Work experience
2007/07 XXX now
Industry: Machinery / equipment / heavy industry
Department of Mechanical Design Engineer
Main responsibilities
1 by the individuals responsible for project, master project schedule, assist business personnel to understand customer needs, design fixture, fixture, equipment modification and field surveying and mapping parts, including assembly drawing, part drawing, BOM list, assist purchasing staff.
2 by the individuals responsible for project, master project schedule.
3 customers are Shanghai GM, Shanghai Volkswagen, Shanghai Natiefu, Wuxi BOSCH, Wuhu United States, Kunshan and Hangzhou etc. universal Fuji.
2003/06 2007/06: Shanghai Keepahead ultrasonic equipment Co., Ltd.
Industry: Machinery / equipment / heavy industry
Department of Mechanical Design Engineer
Main responsibilities:
1 responsible for the project, including equipment assembly and parts production drawings, outsourcing list, pipeline map, assist the purchasing staff to support business personnel, at the same time tracking solution occurs processing manufacturing and assembly debugging problems, and through customer acceptance, and write instructions, sometimes also translated the equipment specifications (export in the English translation).
2 the design of automatic ultrasonic cleaning equipment automatic mechanical arm, through the tunnel drying equipment, automatic high pressure spray, ultrasonic cleaning, wind drying (with the netbelt) and other non-standard equipment.
1998/10 2002/12: Suzhou hongly mould machinery Co. ltd.;
Industry: Machinery / equipment / heavy industry
Technical department technician
Main responsibilities:
The preparation process, and according to the 2D drawings of Singapore engineer design, using Cimtron three-dimensional modeling, and translation of faxes and E-mail. Our products are stainless steel mould of glass.
Project experience
2008/06 2008/07: body machining fixture
Development tools: Pro-e, AutoCAD
Project Description: the fixture fixture for machining workpiece machining center, to the workpiece through the lateral expansion clamping device and the fixing plate, cutting through the spring pin to locate the center hole, take through the length of axis elliptical groove turntable mechanism to realize workpiece.
Responsibility description: responsible for the design of parts and assembly plans, production schedule, follow up the progress, solve the problems in the process of production and assembly.
2007/12 2008/01: a hole position check out
Development tools: Pro-e, AutoCAD
Project Description: the detector used for detecting the position degree of casting hole, products will be placed on the bottom position through a pin to detect the position of the workpiece, the detection position of the other inclined hole made reference plate and pin assembly of the handheld, seized by CMM, if not in the tolerance range of customer requirements in (+ 0.03), need to adjust.
Responsibility description: Design of parts and assembly plans, production schedule, track progress, solve problems, adjust the fixture to meet customer requirements in the tolerance range.
2006/04 - 2006/06: automatic high-pressure spray, ultrasonic cleaning, wind drying equipment production line
Development tools: AutoCAD
Project Description: this production line is used for cleaning and drying of stamping aluminum, steel mesh belt through the motor drive transmission of the workpiece, the first workpiece feeding section, the first and the two or three position is medium pressure spray, fourth, five or six position is the high-pressure spray, through high pressure pump and high pressure spray system, air knife with seventh air compressor station the water cut is eighth station, tunnel oven, final workpiece material.
Responsibilities: assist business personnel to understand customer needs, design and manufacture of the assembly and parts diagram, communication and electrical engineers, support the procurement staff, tracking the progress of solving the production problem, initial customer acceptance records of customer comments, until final acceptance by the customer.
Education and training
1994/09 1998/06: of Wuhan University of science and technology of metallurgical mechanical design and manufacturing automation degree
Certificate
1998/06 master's degree certificate
1996/09 passed the university English six levels
Language ability: English: good
浏览量:2
下载量:0
时间:
英文简历是使用英文写的简历。英文简历(resume)并无固定不变的单一形式,应聘者完全可以根据个人的具体情况来确定采用何种形式,灵活设计。
No.67, Lane123, Job Rd. Job District, Shanghai, China |
(+86) 138-0013-8000 |
service@yjbys.com |
JOB OBJECTIVE | Software Engineer |
IT SKILLS | • | Master user of Microsoft Word, Excel, PowerPoint, Macromedia DWMX, Flash MX and Adobe PS |
• | IBM Certified Database Associate-DB2 Universal Database V8.1 Family |
• | IBM pSerise AIX System Administration-e-server Certified Specialist |
EDUCATION | xx University | 2010-2014 | Tianjin |
School of Electronic Information and Engineering |
• | Vice president Skilled in communicating with team members |
• | Current project:MMO game server design,using Java & IBM DB2,on IBM AIX system in IBM Tech.Center,TJU |
EXPERIENCE | Newhouse International Education Consulting co.,Ltd | 2013/04-Present | Beijing |
CIO & Co-founder |
• | The biggest career consulting team in China |
• | Plan the architecture of the website of the company |
• | Lead a team to actualize the plan |
• | Reseatch English materials and organize the content of the site |
Volunteer Christian Teachers from the US | 2013/03-2013/06 | Tianjin |
Receptionist |
• | Translated daily talks for teachers who are of great religiosity |
• | Schemed part of the teachers activities in Tianjin |
Vitular IT Co.,Ltd | 2012/10-2013/03 | Tianjin |
Game Designer and Programmer |
• | Designed and wrote games for CDMA mobile phone |
• | Mastered Btew platform in 2 weeks by reading plenty of English manuals and supporting materials |
• | Cooperated and intercommunicated with teammates to ensure quality |
• | Solved in a creative way one technical problem of displaying cartoon |
• | Completed 2 projects and submitted |
www.conanren.com | 2009/06-2011/06 | Tianjin |
Chief Site Manager and Administrator |
• | Site Description:a website for comic fans of <Detective Conan> with a forum of over 4,000 members |
• | Planned and wrote lots of documents and manuals for members to detail instrucitons of rule or activity |
• | Read English technical manuals and supporting materials to design and maintain HTML web pages PHP script and security problems |
• | Communicated and cooperated with other site |
• | Solved different kinds of trobules for quality |
Gartner Consulting Inc. | 2009/04-2009/08 | Tianjin |
Web Server Assistant |
• | Top 10 consulting company in US |
• | English is the working language |
• | Assisted to setup the website with CIO |
• | Solved 1 main technical problem:Make aphp script able to log into anotjer server using cookies,e.g.an Email server |
• | Created suitable solution for customers of consulting company |
• | Deeply understood the operation of the company and customers demand |
ENGLISH | • | A good command of spoken and written English,especially in computer-related topics |
SKILLS | • | CET-6 Certificate |
HOBBIES | • | Psychology,Music,E-Sports |
浏览量:2
下载量:0
时间:
英文简历是使用英文写的简历。英文简历(resume)并无固定不变的单一形式,应聘者完全可以根据个人的具体情况来确定采用何种形式,灵活设计。
Resume number: | YJBYS | Updating date: | ||
Name: | Mr. xx | Nationality: | China (Mainland) | |
Current Place: | Fujian | Height/Weight: | 170 cm kg | |
Marital Status: | Single | Age: | 40 years |
Career Objective |
Application type: | Oversea Student | ||
Preferred job title: | Customer & Technology Support: engineer 、 Project/Equipment-Manager/Supervisor/Engineer: 、 Light Industry: | ||
Working life: | 10 | Title: | |
Job type: | Full time | Expected Start date: | In a week |
Expected salary: | ¥8,000~¥9,999 | Preferred working place: | Fujian Hainan Other cities |
Work experience |
|
Educational Background |
Name of School: | SHANGHAI Building Materials Industry College | ||||||||||||||
Highest Degree: | Bachelor | Date of Graduation: | 1996-07-01 | ||||||||||||
Name of Major 1: | industrial control | Name of Major 2: | |||||||||||||
Education experience: |
|
Language Ability |
Foreign Language: | English | Level: | good |
Chinese level: | Cantonese Level: |
Relevant skills and abilities |
2013.5 Get FAE of Advantech Automation Certified 2013.12 Obtain Advantech Certified Professional & Advantech Certified Professional Advanced of Advantech Institut 1998.3 ISO9000 internal auditor training |
Self-recommendation letter |
The good team cooperation spirit. The strong sense of responsibility and working ability Adapt to the new circumstances rapidly. Strong self-culture capability to new knowledge and sharpens own technical. Manner positive enterprising |
浏览量:2
下载量:0
时间:
Professional Title:
Computer Level: junior
Computer Skills:
Strengths: I am skilled in CAD、PRO/E,especially the Sheet Metal Design Module in PRO/E. What's more,I can grasp very well at
project management of product and the advancement of project process.
浏览量:2
下载量:0
时间:
导语:工艺工程师英文简历范文是由读文网小编为你提供的一份适合求职的英文简历,可直接使用或根据实际情况进行修改。
I. Aug. 2008-Dec. 2008,I practiced in all production workshops to know about stamping, painting and welding and process technology of auto of fitting shop.
II. Dec. 2008-Jan. 2010, I was engaged in production control in production department and promotion of lean production. I followed improvement experts who have made site improvement and guidance on Dong’an Auto Engine and Shulan General Machinery for half a month. I could master in elementary knowledge of lean production. I could grasp preparation methods of operation manual and essentials book and working procedure capacity list. And I was in charge of site 5S management of all workshops and daily improvement.
III. Jan. 2010-now, I have been working as site engineer of fitting shop in charge of site technology management and maintenance of standard operation. I participated in change of circle time of workshop and establishment from circles such as workers, machine, stuff to project layout and made follow-up, implementation and confirmation of policies. I amended standard operations of 15 stations of fitting shop and verified the site operation, equipment security capacity, key points guarantee and personnel qualification and workpiece supply. I submitted 18 improvement requirements and constituted 10 measures which effectively enhanced availability rate of work area and process quality assurance ability.
浏览量:2
下载量:0
时间:
Aug. 2008—now, I have been working at the Jilin Automobile Co., Ltd. of FAW
浏览量:2
下载量:0
时间:
|
EDUCATION |
Jobs University | 2012.09-2014.06 |
MSc Financial Mathematics |
• | Relevant courses: Stock Investment, International Economics, Econometrics, Macroeconomics, etc |
• | GPA: 3.9; Rank: 3/49 <Write your GPA or Rank here if it is high, or delete it.> |
Jobs University | 2008.09-2012.06 |
Bachelor of Computer Science and Technology |
• | CUMCM The First Prize (2013) |
• | Outstanding Graduates, National Scholarship (2009) |
SKILLS |
• | Proficient in Matlab, Java, R, SQL, Excel |
• | CFA level 2, 13 ACCA Papers Passed |
• | CET6: 560, IELTS: 7 |
FINANCIAL PROJECT |
Aerospace Securities co. , ltd | 2013.10-2013.12 |
• | Reviewed client files to evaluate alignment of investments with profile |
• | Commended for ability to maintain customer focus while meeting tight deadlines |
• | Confirmed receipt and delivery of securities |
Calyon Alternative Investment Company | 2013.03-2013.07 |
• | Analyzed needs, negotiated sponsorships and presented at five special events featuring industry speakers |
• | Provided leadership to off-shore tech teams via training and analyzing business requirements |
• | Researched of stock index futures price series of statistical arbitrage strategy |
• | Built by MATLAB, R back testing system composed of language and VBA |
The VaR Model to Predict Risk and Evaluate the Financial Markets | 2012.11-2013.02 |
• | Showcased recommendations in advanced PowerPoint presentation and handouts |
• | Analyzed fictitious, publicly traded company; valued securities and intangible assets |
• | Recommended opportunities that would structure capital so as to maximize value |
CAMPUS ACTIVITIES |
A Member of Actuarial Association | 2012.11-2013.02 |
• | Participated in ASCU meeting, organized various activities |
HOBBIES |
Visiting IT BBS |
浏览量:2
下载量:0
时间:
工程师指具有从事工程系统操作、设计、管理、评估能力的人员。工程师的称谓,通常只用于在工程学其中一个范畴持有专业性学位或相等工作经验的人士。今天读文网小编要与大家分享:工业专业工程师英文个人求职简历范本。具体内容如下:
工业专业工程师英文简历
Provide floor support engineering in printed wire assembly (PWA) and subsystem assembly (SSA) areas.
Purchase capital equipment.Interface with vendors. Justify expenditures.
Design plant layout fixtures,and flow charts of material.
Program automatic equipment.
Write process sheets and rework procedures.
Recommend changes to product to allow ease of manufacture.
Implement design changes.Inititate methods and process improvements.
Troubleshoot problems.Effect disposition or rejection of material.
Provide assistance to all other departments.
1984 PRUDENCE D. MCHARRISON LABORATORY,Ruston,LA
浏览量:2
下载量:0
时间:
求职信在谋职中发挥的作用越来越大,往往关乎你的求职成功几率。那关于工程师英文求职信有哪些呢?下面是读文网小编为你整理的工程师英文求职信范文,希望你喜欢。
Dear Ms. Swainsforth:
I am a registered engineer in the state of Michigan, and I am presently seeking a position in the roofing industry. A copy of my resume is enclosed, and I would like to talk with you should you have an appropriate opportunity for me at Kelco Corporation.
My most recent assignment was to manage projects at Forte Products Company to develop products for the commercial roofing industry. Part of my responsibility was to provide technical support to sales people, when they had questions of a technical nature from their engineering or architectural customers.
I have experience in quality assurance and the application of control charting to a large insulation line at Forte Products. This resulted in a 23% reduction in scrap and a 76% reduction in customer complaints.
I am seeking a position as a team leader or manager in product or process development, or in quality assurance. My compensation requirements are in the $65,000 to $70,000 range, and I am open to relocation.--www.d9read.net
I would welcome the opportunity to talk with you and discuss the technical contributions I could make to the Kelco Corporation, especially in the development of exciting new roofing products.
Thank you for reviewing my credentials, and I look forward to hearing from you shortly.
Sincerely, James C. Willison
James C. Willison
看过“工程师英文求职信范文”
浏览量:3
下载量:0
时间: